Expression of TRPC3 in Chinese Hamster Ovary Cells Results in Calcium-activated Cation Currents Not Related to Store Depletion

TRPC3 (or Htrp3) is a human member of the trp family of Ca²⁺-permeable cation channels. Since expression of TRPC3 cDNA results in markedly enhanced Ca²⁺ influx in response to stimulation of membrane receptors linked to phospholipase C (Zhu, X., J. Meisheng, M. Peyton, G. Bouley, R. Hurst, E. Stefani, and L. Birnbaumer. 1996. Cell. 85:661–671), we tested whether TRPC3 might represent a Ca²⁺ entry pathway activated as a consequence of depletion of intracellular calcium stores. CHO cells expressing TRPC3 after intranuclear injection of cDNA coding for TRPC3 were identified by fluorescence from green fluorescent protein. Expression of TRPC3 produced cation currents with little selectivity for Ca²⁺ over Na⁺. These currents were constitutively active, not enhanced by depletion of calcium stores with inositol-1,4,5-trisphosphate or thapsigargin, and attenuated by strong intracellular Ca²⁺ buffering. Ionomycin led to profound increases of currents, but this effect was strictly dependent on the presence of extracellular Ca²⁺. Likewise, infusion of Ca²⁺ into cell through the patch pipette increased TRPC3 currents. Therefore, TRPC3 is stimulated by a Ca²⁺-dependent mechanism. Studies on TRPC3 in inside-out patches showed cation-selective channels with 60-pS conductance and short (<2 ms) mean open times. Application of ionomycin to cells increased channel activity in cell-attached patches. Increasing the Ca²⁺ concentration on the cytosolic side of inside-out patches (from 0 to 1 and 30 μM), however, failed to stimulate channel activity, even in the presence of calmodulin (0.2 μM). We conclude that TRPC3 codes for a Ca²⁺-permeable channel that supports Ca²⁺-induced Ca²⁺-entry but should not be considered store operated.     

Computer determination of perfusion patterns in pulmonary capillary networks

Hanger, Christopher C., Robert G. Presson, Jr., Osamu Okada,Steven J. Janke, John J. Watkins, Wiltz W. Wagner, Jr., and Ronald L. Capen. Computer determination of perfusion patterns in pulmonarycapillary networks. J. Appl. Physiol.82(4): 1283-1289, 1997.Individual pulmonary capillaries are notsteadily perfused. By using in vivo microscopy, it can readily bedemonstrated that perfusion continually switches between capillarysegments and between portions of the network within a single alveolarwall. These changes in capillary perfusion occur even when upstream pressure and flow are constant. Flow switching between capillary segments in the absence of hemodynamic changes in large upstream vessels suggests that capillary perfusion patterns could be random. Tocalculate the probability that perfusion patterns could occur bychance, it is necessary to know the total number of possible perfusionpatterns in a given capillary network. We developed a computer programthat can determine every possible perfusion pattern for any givencapillary network, and from that information we can calculate whetherperfusion of individual segments in the network is random. With theresults of the computer program, we have obtained statistical evidencethat some capillary segments in a network are nonrandomly perfused.

     

Ein neuer Palaeodictyopteren-Fund aus dem westdeutschen Namurium

From the Namurian B of the Bergisches Land the oldest known remain of the Dictyoneuridae is described, namedSchmidtopteron adictyon n. g., n. sp. Present is a wing with the following characteristics: 1. shape long and slender; 2. subcosta relativly short; 3. radius nearly as long as the wing; 4. radius-sector branched off from the radius at 1/5 of the length of the wing (prox.), subdivided into 4 branches; 5. medialis subdivided also at 1/5 of the length of the wing; MEp with 2 branches; 6. cubitus subdivided at 1/10 of the length of the wing, CUp undivided; 7. anal veins 4 in number, separated each from the others in full length; at least A1 und A2 bifurcated; 8. A1 and CUp joined by a short connecting vein; 9. archaeodictyon not present. Schmidtopteron adictyon is the most primitive Namurian wing known. Its systematic position results from the structure of the only little branched veins. The absence of the archaeodictyon may be attributed to preservation: only the external mould of the upper surface of the wing is preserved. From all other genera of the Dictyoneuridae,Schmidtopteron is separated by the connection between A1 and CUp. This feature, and the relative large anal area, show thatSchmidtopteron is not the ancestor of younger Dictyoneuridae, but an early side branch of the evolution of this family.     

Mineralization of 2,4-dichlorophenoxyacetic acid (2,4-D) in soil inoculated with Pseudomonas cepacia DBO1(pRO101), Alcaligenes eutrophus AEO106(pRO101) and Alcaligenes eutrophus JMP134(pJP4): effects of inoculation level and substrate concentration

Mineralization of 2,4-dichlorophenoxyacetic acid (2,4-D) by two Alcaligenes eutrophus strains and one Pseudomonas cepacia strain containing the 2,4-D degrading plasmids pJP4 or pRO101 (=pJP4::Tn1721) was tested in 50 g (wet wt) samples of non-sterile soil. Mineralization was measured as ¹⁴C-CO₂evolved during degradation of uniformly-ring-labelled ¹⁴C-2,4-D. When the strains were inoculated to a level of approximately 10⁸ CFU/g soil, between 20 and 45% of the added 2,4-D (0.05 ppm, 10 ppm or 500 ppm) was mineralized within 72 h. Mineralization of 0.05 ppm and 10 ppm, 2,4-D by the two A. eutrophus strains was identical and rapid whereas mineralization by P. cepacia DBO1(pRO101) occurred more slowly. In contrast, mineralization of 500 ppm 2,4-D by the two A. eutrophus strains was very slow whereas mineralization by P. cepacia DBO1 was more rapid. Comparison of 2,4-D mineralization at different levels of inoculation with P. cepacia DBO1(pRO101) (6×10⁴, 6×10⁶ and 1×10⁸ CFU/g soil) revealed that the maximum mineralization rate was reached earlier with the high inoculation levels than with the low level. The kinetics of mineralization were evaluated by nonlinear regression analysis using five different models. The linear or the logarithmic form of a three-half-order model were found to be the most appropriate models for describing 2,4-D mineralization in soil. In the cases in which the logarithmic form of the three-half-order model was the most appropriate model we found, in accordance with the assumptions of the model, a significant growth of the inoculated strains.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - CFU colony forming units - PTYG peptone, tryptone, yeast & glucose - DPM disintegrations per minute     

Process‐based functions for seed retention on animals: a test of improved descriptions of dispersal using multiple data sets

Studies of external seed transport on animals usually assume that the probability of detachment is constant, so that seed retention should show a simple exponential relationship with time. This assumption has not been tested explicitly, and may lead to inaccurate representation of long distance seed dispersal by animals. We test the assumption by comparing the fit to empirical data of simple, two‐parameter functions. Fifty‐two data sets were obtained from five published studies, describing seed retention of 32 plant species on sheep, cattle, deer, goats and mice. Model selection suggested a simple exponential function was adequate for data sets in which seed retention was followed for short periods ( <48 h). The data gathered over longer periods (49–219 days) were best described by the power exponential function, a form of the stretched exponential which allows a changing dropping rate. In these cases the power exponential showed that seed dropping rate decreased with time, suggesting that seeds vary in attachment, with some seeds becoming deeply buried or wound up in the animal's coat. Comparison of fitted parameters across all the data sets also confirmed that seeds with adhesive structures have lower dropping rates than those without. We conclude that the seed dropping rate often changes with time during external transport on animals and that the power exponential is an effective function to describe this change. We advise that, to analyse seed dropping rates adequately, retention should be measured over reasonable time periods – until most seeds are dropped – and both the simple and power exponential functions should be fitted to the resulting data. To increase its utility, we provide functions describing the seed dropping rate and the dispersal kernel resulting from the power exponential relationship.     

Über die mikrobicide Wirkung von organischen Säuren und ihren Kupfersalzen

Ohne Zusammenfassung     

Mycoderma Lafarii n. sp.

Ohne Zusammenfassung     

Validation of density–elasticity relationships for finite element modeling of human pelvic bone by modal analysis

In total hip arthroplasty and particularly in revision surgery, computer assisted pre-operative prediction of the best possible anchorage strategy for implant fixation would be a great help to the surgeon. Computer simulation relies on validated numerical models. In the current study, three density–elasticity relationships (No. 1–3) from the literature for inhomogeneous material parameter assignment from CT data in automated finite element (FE) modeling of long bones were evaluated for their suitability for FE modeling of human pelvic bone. Numerical modal analysis was conducted on 10 FE models of hemipelvic bone specimens and compared to the gold standard provided by experimental modal analysis results from a previous in-vitro study on the same specimens. Overall, calculated resonance frequencies came out lower than measured values. Magnitude of mean relative deviation of numerical resonance frequencies with regard to measured values is lowest for the density–elasticity relationship No. 3 (−15.9%) and considerably higher for both density–elasticity relationships No. 1 (−41.1%) and No. 2 (−45.0%). Mean MAC values over all specimens amount to 77.8% (No. 1), 78.5% (No. 2), and 83.0% (No. 3). MAC results show, that mode shapes are only slightly influenced by material distribution. Calculated resonance frequencies are generally lower than measured values, which indicates, that numerical models lack stiffness. Even when using the best suited (No. 3) out of three investigated density–elasticity relationships, in FE modeling of pelvic bone a considerable underestimation of model stiffness has to be taken into account.